Moisture Resistance Panel is a high performance plasterboard that resists the ingress of moisture.
Ideal for use in internal building areas with high humidity, such as kitchens and bathrooms.
Some benefits of using moisture-resistant plasterboard include:
They are designed to withstand moist and humid conditions and can come into contact with water without being damaged.

Product Name: pipe reducer
Size: Seamless 1/2"-24" (DN15-DN600)
Welded 1/2"-48" (DN15-DN1200)
Thickness: SCH5 to SCH160
Standard: ASTM/ANSI B16.9
Connection: Butt welded
Application: Petroleum, gas, chemical, power, shipbuilding, metallurgy, construction, etc.
Material: 300series: SS304/ SS304L/ SS304H/ SS321/ SS316/ SS316L/ SS310S
Alloy : Alloy 20/ Alloy28 /Alloy31;

Flange connection is the two pipes, pipe fittings or equipment, first fixed on a flange, between the two flanges, plus flange pad, bolted together to complete the connection.
Flanges are widely used in water conservancy, electric power, power station, pipeline fittings, industry, pressure vessels and so on

Carbon Steel: ASTM A105, LF2, CL1 / CL2, 16MN, 20#, WPB
Stainless Steel: ASTM A182, F304 / 304L, F316 / 316L, A182F317/ 317L, A182F310, F321, F347, 316Ti
Alloy Steel: ASTM A182 A182 F12, F11, F22, F5, F9, F91, F51, F53, F55, F60, F44, F304H, F316H, F317H, F321H, F347H, INCONEL 600, 625, 825, etc.

Elbow is a commonly used connection pipe fittings in water heating installation, Which is used to connect the corner of the pipeline and change the direction of the pipeline.
Because the elbow has good comprehensive performance, It is widely used in chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, Refrigeration, health, water heating, fire fighting, power, aerospace, shipbuilding and other basic projects.

Stainless Steel plate, also known as plate and stainless plate, is a modern, multi-purpose product used in a variety of construction and manufacturing projects.
Benefits include resistance to corrosion, fire and heat, as well as a favourable strength to weight ratio and enhanced appearance compared to other metals.

Stainless steel coil is also called coil tape, coil material, coil plate, plate coil.
Stainless steel features:
1. Complete product specifications, diverse materials;
2. High dimensional accuracy, up to ±0.1mm;
3. Good surface quality, good brightness;
4. Strong corrosion resistance, high tensile strength and fatigue strength;
5. Stable chemical composition, pure steel, low inclusion content;
6. Good packaging, favorable price;
7. It can be done without calibration

Strip steel or cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled.
The coil is then reduced by a single stand cold roll steel mill straight away or reversing mill or in a tandem mill consisting of several single stands in a series.
The strip is reduced to approximately final thickness by cold-rolling directly,
or with the inclusion of an annealing operation at some intermediate thickness to facilitate further cold reduction or to obtain mechanical properties desired in the finished product.
High carbon strip steel requires additional annealing and cold reduction operations.
The coil is then slit to the desired width through the process of roll slitting.

G.I. Sheets are used in fabricating door and wall panels due to its flat surface. G.I. Sheets have protective coating that make it an ideal material for roofing.

Model Number: SGCC, SGCH, DX51D, Q235,Q195
Technique: Cold Rolled
Surface Treatment: Galvanized,Zinc Coated,Hot Dipped
Special Use: High-strength Steel Plate
Width: 750-1250mm

Galvanized steel coil is produced by coating a layer of zinc alloy on the surface of steel plate.
It has the strength of steel and the corrosion resistance of zinc.
The galvanized coil is employed outdoor, as it shows anti rusting tendencies.
Most significantly, it is used in constructing strong roofing system.
Galvanized steel coil can be used outside because of its natural ability to avoid rust or corrosion.
The coil itself is usually available in different dimensions.

Aluminum sheets and plates are lightweight and flat or formed with a surface texture that helps increase traction and overall rigidity.
Standard aluminum sheets are also known as flat stock. They are solid and provide a good strength-to-weight ratio.
Aluminum expanded and perforated sheets have openings that allow light, air, and water to pass through.
Aluminum textured sheets and plates have a raised surface for an improved look and to increase surface traction.

Aluminum coil refers to sheets of flattened aluminum that have been rolled (or coiled), with the width of the sheet being much greater than its thickness, an aluminum coil is simply an aluminum sheet wound on a core.

Square tubes are structural steel or metal products that can be used to form a network of building columns，the uses of square tubes are incredibly wide in scope - from the simple architectural column to more intricate designs, such as decorative dividers or modern metal gates/entryways.