Reducing tube reducer is also called large and small head, reducing tube, and abnormal direct flow. A chemical pipe fitting used to connect two pipes of different diameters. According to the different shapes, it is divided into concentric large and small head and eccentric large and small head two kinds. The size of the head material includes stainless steel size head (304304l316316l), alloy steel, carbon steel size head, the size of the head material is 20 steel, Q235, Q345, 16Mn and so on.

The size head (reducing pipe) is a pipe fitting for the diameter of the pipe. The commonly used forming process is reducing pressing, expanding pressing or reducing plus expanding pressing, and stamping can also be used for some specifications of reducing tubes.

Pipe reducer is one of many accessories used to control the flow in the pipe system. In the pipeline system, there are two main reducer: concentric reducer and eccentric reducer.

A pipe reducer is a pipe accessory connecting larger pipes and smaller pipes. Therefore, it reduces the size of the pipe in the piping system, from one size to another. Pipe diameter reducer can often be used to connect pipes of different sizes.

As a popular pipe fitting, the pipe flange is widely used. The flange is used to mechanically connect the two tubes together. It can also be used to mechanically connect pipes to tee, valves, throttle devices or any other equipment. Flanges are available in round, square and rectangular shapes. In some cases, the flanges are usually annular or plate-shaped, and when fixed to the pipe, form an edge formed at the end of the pipe. This is an example of a closet flange.

Flanges are used to connect pipes, valves, fittings and special items such as filters and pressure vessels. The cover plate can be connected to form a "blind flange". The flanges are bolted, and the sealing is usually done using spacers or other methods.
The main use of flanges is to connect pumps, pipes, valves and other equipment to form the piping system. Usually, the flanges are threaded or welded and you can connect the two flanges with washer bolts and provide a seal to make the plumbing system easily accessible.

The flange connection allows both materials to be connected through the inner and outer lips. Place decks between them to prevent any problems that may occur. Then, the installer uses the flange-fixing bolts. To ensure the tightness of the flange connection, the sealing element is used. To ensure a healthy seal, carefully align the flanges and tighten the bolts with the same torque.

Flanges are created in different sizes according on the intended application, and they are categorized based on different national rules and connection types. The highest heat and pressure values to be subjected to the system to be used, the potential rate of corrosion to be exposed to the line, and the location where the flange will be used are taken into consideration when choosing the type of material to be used in its production.

The pipe elbow is installed between two pipes so that the fluid direction can be changed to 45 degrees. The 45 degree bend produces less friction and lower pressure than the 90 degree bend.

The 90° elbow is used to connect two pipes at right angles to each other. In horizontal devices, they are used as corner ends or rail ends. In other words, a 90-degree bend is easily attached to pipes made of many different materials, including rubber, steel, cast iron, copper, and plastic.The 45° tube elbow is used to connect the pipe at a 45° tube angle. As the name suggests, this is a pipe fitting device that bends in such a way to change 45° of the fluid / gas flow in the pipe.

An elbow is the fittings used in a pipe system to connect two pipes of the same or different nominal diameter. It bends at a certain Angle, so that the straight pipe is connected at a certain Angle, so as to change the direction.

A carbon steel pipe reducer is a type of pipe fitting that is seamlessly welded and used for connecting pipes in a pipeline system, enabling a change in pipe size or flow direction. It is commonly used in various industries for efficient and reliable pipe-line connections.